Posts

How To Buy High Quality Plastic Injection Mold

/in , , , , , , /by

How To Buy High Quality Plastic Injection Mold

There are plenty of injection Mold Company in China, especially gathered in Guangdong province and Zhejiang province. Then how to customize good quality plastic injection mold? How to choose most suitable mold company?

Mold flow analysis

Before detail mold design, should have mold flow analysis of plastic part. By analyzing material flow direction and path route, check whether injection gate reasonable or not, or there is any flowing imbalance or other problems.

Professional Plastic mold design

Mold design is the basic, also it is the first important item for mold manufacturing. It must be reasonable, based on exact plastic part’s requirement, then to have the most appropriate design. For example, PVC injection molding, if plastic part small, better to use valve gate system or submarine gate. For large PVC part with thick wall, then better to use fan-shaped gate type.

Mold tooling

Good quality injection mold related to precision mold tooling. For example, medical syringe barrel mold, it has strictly requirement of mold core part’s verticality, almost there is no demolding angle, as require sealing the best between barrel and gasket. Here best to use Japanese brand Sodick precision wire cutting machine, mold dimension can be controlled within 0.005mm. Additional, Fidia three axis high speed CNC machine from Italy, Agie Charmilles EDM machine from Switzerland, are most suitable for tooling high precision plastic mold for medical plastic parts, packaging parts and automotive parts. When you hesitate to choose which mold company, to check their tooling equipments first.

Mold installation

After all above items smooth finished, then comes to labor works. Mold assembling and installation should be done carefully, workers should pay attention to this part, make sure every spare part has been assembled and in most suited location without any damage. Also make sure under safety condition.

Mold adjusting and testing

If injection mold have any problem, then it can be directly reflected on plastic parts. Mold testing is important, as custom plastic mold company and client will have fully understand, then know how to fix the mold or next. So at first, all related auxiliary equipments should be well installed, like air blow system, water cooling system, etc. Check its reliability, then add plastic material to test the mold. At the same time, injection molding condition should be suitable.

Mold maintenance

Suitable maintenance of injection mold is important. This will prolong mold life time, also you may have the idea of this injection molds company, how their attitude of the mold manufacturing.

Thermoplastic injection molding

/in , , , , , , , , , , , /by

Thermoplastic injection molding

ST. construction of moulds for plastic materials, technical and sports articles. We specialise in the construction of mono-injection and bi-injection moulds in aluminium and steel for any type of plastic product. We have a workshop with 10 high quality workcentres with 3, 4 and 5 axes, and various CAD-CAM stations for designing mouldst. The largest tecnology for moulds plastic materials.

Moulds for plastic materials
Unique prototypes, perfectly finished, made with high quality materials for guaranteed long-life, with high-tech design solutions starting from the drawing or mathematical model of the final product supplied by the customer, SI.MEC’s technical office develops the mould project, in constant co-operation with the customer, offering the solutions most suitable for the specific characteristics: in this phase, the creativity and experience of the technicians integrate with the use of constantly evolving software.

ST group moulds- custom plastic injection molding service company in China
solutions for designing and making mouldsThanks to the on-going innovation of the software programs we use, we can pin-point the best solutions for designing and making moulds. Our technical office is always ready to adopt new solutions to satisfy the customer.

We are presenting some of our projects, achieved with renewed creativity, with the tiniest details taken care of, by controlling all process stages of the production of thermoplastic injection molding.

Plastic moulds parts
Unique prototypes, perfectly finished, made with high quality materials for guaranteed long-life.

A wide range of products and moulds for the plastic material industry like:

plastic mold partsElectroerosion for moulds for plastic material
Pallet changes
Mould adaptation
Polishing
Sandblasting and assembly
Plastic mould parts

the molding company
Injection moulds
Co-injection moulds
Manufacturer of plastic moulds
Plastic moulding

Plastic Molding Manufacturing
Injection mould
Moulds design
Moulds manufacturing

plastic molding company
Thermo plastic moulds
Moulds for plastic
Plastic materials for technical and sport articles
For further information about our products catalogue, please visit our official website: www.simec-moulds.com

What is the Process of Plastic Injection Moulding

/in , , , , , , , /by

What is the Process of Plastic Injection Moulding

The plastic injection moulding process produces large numbers of parts of high quality with great accuracy, very quickly. first to reach this requirement we need find plastic mold companies to make the plastic mold according to part design or part samples, this is first part of it to make plastic molding part by plastic moulding process, otherwise we can talk nothing about plastic molding process.

Nowadays

Plastic material in the form of granules is melted until soft enough to be injected under pressure to fill a mould.  The result is that the shape is exactly copied.  Once the plastic moulding has cooled sufficiently to harden the mould opens releasing the part.  The whole injection moulding process then repeats.

plastic mold

plastic mold and Close the plastic mold

CLAMPING – the moving and fixed platens of the injection moulding machine (see next section) holds the plastic mold tool together under pressure.

Inject Molten Plastic

INJECTION – the molten plastic that has been melted from pellet form in the barrel of the moulding machine (see next section) is injected under pressure into the mould.

DWELLING – after the molten plastic has been injected into the mould pressure is applied to ensure all cavities are filled.

COOLING – the plastic parts are then allowed to solidify in the mould.plastic mold company

Open Mould and Eject Part

OPENING – the moving platen moves away from the fixed platen (see next section) separating the mould tool.

EJECTION – rods, a plate or air blast then aids ejection of the completed plastic moulding from the injection mould tool.

The length of time from closing the plastic molds to ejecting the finished plastic moulding is the cycle.

Granted, widow black you are more of a logical or high money real on ghostbusters download slots fishes player then I esteem you will make to machine game interest in Super Patriot Party after a while. Coated slots real money

Prototype And Mold Design

/0 Comments/in , , , , , , , , , , , , , , /by

Prototype And Mold Design

Usually, the new designed products aren’t perfect, even can’t use. before make plastic mold the prototype is the first step to verify the feasibility, is the most effective way to find out the lacking, defects and drawbacks of the designed products. Prototyping usually is just making several samples, and the delivery is fast, cost is low, and more important is we can quickly find and improve the designed products, which provides a sufficient basis for stereotypes and mass production.
1, Test appearance design. Prototyping is not only visual, but also in touch, and you can reflects the designer’s creativity in kind intuitively, which can avoid the abuse of“Beautiful design but not beautiful products”.

2, Test the design structure. As the prototyping is assembly, so it can reflects the rationality of the structure and Installation of the products intuitively

3,  Avoid the risk of directly plastic injection mould making

4,  Make the product available much earlier. As the prototyping is in advance, you can prepare for publicize, earlier sale, produce the products use the prototyping before the mould making is finished, in order to dominate the market as soon as possible

What We Can Do?

Our company as a medium-sized factory for plastic products and Plastic injection mold design, mould making, plastic moulding and assembly, also is famous in china in prototyping factory. In the early stage of our factory, we are mainly focusing on rapid prototyping and mould making. Now, we can provide plastic prototyping, silicon prototyping and metal prototyping. According to the requirements of the customers, we are mainly use SLA/SLS and CNC prototyping.

Our Advantages:

1 Lower cost and higher quality than other places

2 Fast delivery as we equipped with advanced machines

3 Experienced as our operators are all have more than five years’ experience

4 Production methods are optional as we can provide two choice: SLA/SLS and CNC.

5 Material sundry, you can choose plastic prototyping( mainly use plastic), silicon prototyping(mainly use silicon) and metal prototyping ( mainly use Aluminum-magnesium alloy and other Metallic materials)

6 We can provide signal or several prototyping products

7 System management in all links.

Plastic Mold Design Service

Our company is equipped with professional designers, using of advanced design software and provide free design services for customers. Only tell us your idea, we can provide the perfect product design and mould design. As equipped with two professional plastic products and plastic mold designers, we can provide any products and injection mould design service according to the needs of customers. And we can convert design drawings into different file formats according to customer requirements to help customers to preview. Of course, as a serious company, we will strictly try our best to protect client’s intellectual property.

Our Advantages of Design Service:

1,  Low cost and even no cost sometimes

2,  Convenient Communication. All our designers are in good English skills, including speaking, writing and listening.
3,  Advanced skills with the advanced design software
4,  Experienced as all the designers are of over 5 years of design and practice experience
5,  Fast delivery as we have professional skills, advanced software, experienced and convenient communication which improves the efficiency and shortens the design time
6,  Many kinds of file formats, we can provide many kinds of file formats for the design drawing according the customers’ requirements.
7,  It is combination of theory and practice. When we design, we will comprehensive consideration of aesthetic and practical, economic and operational.
8,  Strictly Confidential. We will absolutely strict protection of customer data and intellectual property.
9,  Perfect Service. We provide not only design service, but also provide prototyping cost,plastic mold cost and Injection molding cost.
10,  Customer Satisfaction. We have clients worldwide, and if necessary, they can give you a reference.

Plastic Mold

/4 Comments/in , , , , , , , , , , , , , , , , , , /by

Plastic Mold

Plastic has, quite literally, become the cornerstone of our society.  We make so many things from plastic that it is hard to imagine what our lives would be like if it was never invented.  With so many of our everyday products being made of plastic, it is easy to understand why plastic injection molding is such a huge industry.

Approximately 30% of all plastic products are produced using an injection molding process.  Of this 30%, a large amount of these products are produced by using custom Plastic Mold technology & injection molding technology.  Six steps are involved in the injection molding process, after the prototype has been made and approved.

Plastic Mold

The first step to the injection molding process is the clamping of the injection mould.  This clamping unit is one of three standard parts of the injection machine.  They are the mold, the clamping unit and the injection unit.  The clamp is what actually holds the mold while the melted plastic is being injected, the mold is held under pressure while the injected plastic is cooling.

Next is the actual injection of the melted plastic.  The plastic usually begins this process as pellets that are put into a large hopper.  The pellets are then fed to a cylinder; here they are heated until they become molten plastic that is easily forced into the mold.  The plastic stays in the plastic mold, where it is being clamped under pressure until it cools.

The next couple of steps consist of the dwelling phase, which is basically making sure that all of the cavities of the mold are filled with the melted plastic.  After the dwelling phase, the cooling process begins and continues until the plastic becomes solid inside the form.  Finally, the mold is opened and the newly formed plastic part is ejected from its mold.  The part is cleaned of any extra plastic from the mold.

As with any process, there are advantages and disadvantages associated with plastic injection molding.  The advantages outweigh the disadvantages for most companies; they include being able to keep up high levels of production, being able to replicate a high tolerance level in the products being produced, and lower costs for labor as the bulk of the work is done by machine.  Plastic injection molding also has the added benefit of lower scrap costs because the mold is so precisely made.Plastic Mould

However, the disadvantages can be a deal breaker for smaller companies that would like to utilize plastic injection molding as a way to produce parts.  These disadvantages are, that they equipment needed is expensive, therefore, increasing operating costs.

Thankfully, for these smaller companies, there are businesses that specialize in custom plastic injection molding.  They will make a mock up mold to the exact specifications, run it through the complete process and present the completed piece along with an estimate to complete the job to the customer.

Linda Moore writes on a variety of subjects including home ownership, travel, personal enrichment,

Injection Molding

/1 Comment/in , , , , , , , , , , , , , , , , , , , /by

Non stick coatings for injection molding Parts?

Yes! Just recognize the difference between ‘lubrication’ and ‘release’ and you need never fail again.

Today, there are a number of hard coatings for you, the mold maker, to choose. Many are conformal in nature and replicate surface geometry and finish. Many, too, resist thermal oxidation and can wear well. But what about release? You know, actual non-stick properties, like an egg cooked in a fry pan?

The answer for injection molding is not lubrication. And here is why.

Lubrication is defined as a means to reduce friction or wear. That is true. But it is meant to be a substance between two bodies in relative motion, a load bearing interface between two solid, cohesive surfaces. And that is not what you find when you heat the mold surface above your material glass transition temperature (Tg). Which is why hard coatings designed exclusively for lubrication fail.

Depending on the compounds you are molding, ‘sticking’ failures can manifest in a number of ways: skinning, loss of polymer mobility, lower gloss and surface roughness. Hard coatings ‘with lubrication’ can negatively affect heating and cooling which, alone, can alter depth and visibility of weld lines.

On the other hand, hard coatings for non stick can make significant improvements to finish. Surface flaws can be eliminated. And that means no more painting. Structural imperfections, too, like molded in stresses, which lead to warping or distortion, can be a thing of the past.

Unfortunately, Plastic mold makers who have had negative coating experiences are reluctant to re-consider. No different than those currently experiencing satisfactory but marginal performance. Why change, they say. Especially when you believe you have tried or know about all the coatings available, today, like plating, Teflon or PTFE, PVD or PACVD.

So, where is your answer? Just ask around. You will not have to look far. The answer, you will discover, is with those who understand surface forces, the characterization of adhesion, non stick coatings for injection molding parts.

Want more information? Need help with your surface engineering?

William Gunnar, a degreed scientist, researcher, engineer, and friend, has helped thousands of ‘best of class’ product designers and equipment manufacturers — for nearly 20 years now — surface engineer with coatings for success.

His publication, brings wisdom, honesty, leading edge information, and no nonsense advice to thousands weekly. Put together by some of the world’s leading experts in coatings and manufacturing, his FREE newsletters are truly must-reads for those who want to be ‘in-the-know’.

Custom Injection Molding

/0 Comments/in , , , , , , , , , , , , , , , , , , /by

Custom Injection Molding

If  your business needs plastic molding products with specific types and dimensions, then you should turn to custom injection molding companies. These manufacturers have the ability to make plastic parts for specific applications – they can customize virtually all plastic components per your requirements. They can stamp your logo or messages, produce unique colors and designs and package them specifically based on what you want and need.

Choosing a custom injection molding company

Most of the custom injection molding companies can produce any plastic product you specify, but not all of them go the extra mile to take care of ‘finishing services’ such as decorating, assembly, labeling and packaging. Some even have a design group that can assist clients with plastic part and mold design. From rapid prototyping and tooling to injection molding, ultrasonic and plastic welding and stamping, these companies can assist you every step of the way. Go for manufacturers that offer these added perks – you will end up saving time, money and effort.

Note that some custom injection molding companies do not do these extras in-house – they hire sub-assemblers and finishers, but are still able to produce products at par with your standards.

Also examine the manufacturing company’s logistics and scheduling system. They should be able to handle your delivery needs no matter how demanding they may be. You should also go for companies that implement strict controls to monitor the whole custom injection molding process. They should have the latest inspection equipment at hand to allow them to match the closest tolerance and thus provide quality consistently.

The custom injection molding company’s plant climate is also very important. They should have facilities that ensure mold cooling system control. You may contact any companies in the internet directory for your custom injection molding needs. injection Molding provides detailed information on Plastic Molds, Injection Molding, Plastic Injection Molding, Injection Molding Machines, Custom Injection Molding and more.

What Is Plastic Molding

/2 Comments/in , , , , , , , , , , , , , , , , , , /by

What Is Plastic Molding

Plastics are synthetically produced non-metallic compounds. It can be molded into various forms and hardened for commercial use. Plastic molding products can be seen everywhere. Examples are jars, protective caps, plastic tubes, grips, toys, bottles, cases, accessories, kitchen utensils and a lot more.

Even the keyboard and the mouse that you use are made through plastic molding. Even the plastic parts of the chair that you are sitting on are created this way.

The basic idea in plastic molding is inserting molten liquid plastic into a ready shaped mold, for example the mold of a bottle. It will be then allowed to cool, then the mold will be removed to reveal the plastic bottle.

Plastic moulding can also custom-mold a wide variety of plastic products including: garden pots, cabinets, office trays and boxes, barriers, barricades and traffic signage and displays for product and marketing promotions.

If you are planning to go into plastic molding business, you should first know the different processes.  Choose from a plastic molding process that fits your budget, your expertise, and your resources. Here are basic definitions of various methods of plastic molding.

The Plastic Molding Processes:

1.      Injection Molding

In Injection Molding, melted plastic is forced into a mold cavity. Once cooled, the mold can be removed. This plastic molding process is commonly used in mass-production or prototyping of a product. Injection molding machines were made in the 1930’s. These can be used to mass produce toys, kitchen utensils, bottle caps, and cell phone stands to name a few.

2.      Blow Molding

Blow molding is like injection molding except that hot liquid plastic pours out of a barrel vertically in a molten tube. The mold closes on it and forces it outward to conform to the inside shape of the mold. When it is cooled, the hollow part is formed. Examples of blow molding products are bottles, tubes and containers.

Equipments needed in setting-up a blow molding business are relatively higher than injection molding.

3.      Compression Molding

In this type of plastic molds, a slug of hard plastic is pressed between two heated mold halves. Compression molding usually uses vertical presses instead of the horizontal presses used for injection and blow molding. The parts formed are then air-cooled. Prices of equipment used for compression molding are moderate.

4.      Film Insert Molding

This plastic molding technique imbeds an image beneath the surface of a molded part. A material like film or fabric is inserted into a mold. Plastic is then injected.

5.      Gas Assist Molding

Also called gas injection molding is used to create plastic parts with hollow interiors. Partial shot of plastic is then followed by high-pressure gas to fill the mold cavity with plastic.

6.      Rotational Molding

Hollow molds packed with powdered plastic are secured to pipe-like spokes that extend from a central hub. The molds rotate on separate axes at once. The hub swings the whole mold to a closed furnace room causing the powder to melt and stick to the insides of the tools. As the molds turn slowly, the tools move into a cooling room. Here, sprayed water causes the plastic to harden into a hollow part. In this type of plastic molds tooling costs are low and piece prices are high. Cycle time takes about 40-45 minutes.

7.      Structural Foam Molding

Structural foam molding is a process of plastic molding usually used for parts that require thicker walls than standard injection molding. Inserting a small amount of nitrogen or chemical blow agent into the plastic material makes the walls thicker. Foaming happens as the melted plastic material enters the mold cavity. A thin plastic skin forms and solidifies in the mold wall. This type of plastic molding can be used with any thermoplastic that can be injection molded.

8.      Thermoforming

In this plastic molding process, sheets of pre-extruded rigid plastics are horizontally heated and sucked down into hollow one-piece tools. When the hot plastic solidifies, its shape conforms to that of the mold.

Tooling costs are usually low and piece prices vary on the machinery.

Plastic molding is a very technical process. It needs experts in this type of manufacturing business for it to be competitive in the market. Therefore, a very scientific and systematic study should be first made before going into this endeavor, if you want to know more about us, please go to our mean website to know more.