Posts

How To Buy High Quality Plastic Injection Mold

How To Buy High Quality Plastic Injection Mold

There are plenty of injection Mold Company in China, especially gathered in Guangdong province and Zhejiang province. Then how to customize good quality plastic injection mold? How to choose most suitable mold company?

Mold flow analysis

Before detail mold design, should have mold flow analysis of plastic part. By analyzing material flow direction and path route, check whether injection gate reasonable or not, or there is any flowing imbalance or other problems.

Professional Plastic mold design

Mold design is the basic, also it is the first important item for mold manufacturing. It must be reasonable, based on exact plastic part’s requirement, then to have the most appropriate design. For example, PVC injection molding, if plastic part small, better to use valve gate system or submarine gate. For large PVC part with thick wall, then better to use fan-shaped gate type.

Mold tooling

Good quality injection mold related to precision mold tooling. For example, medical syringe barrel mold, it has strictly requirement of mold core part’s verticality, almost there is no demolding angle, as require sealing the best between barrel and gasket. Here best to use Japanese brand Sodick precision wire cutting machine, mold dimension can be controlled within 0.005mm. Additional, Fidia three axis high speed CNC machine from Italy, Agie Charmilles EDM machine from Switzerland, are most suitable for tooling high precision plastic mold for medical plastic parts, packaging parts and automotive parts. When you hesitate to choose which mold company, to check their tooling equipments first.

Mold installation

After all above items smooth finished, then comes to labor works. Mold assembling and installation should be done carefully, workers should pay attention to this part, make sure every spare part has been assembled and in most suited location without any damage. Also make sure under safety condition.

Mold adjusting and testing

If injection mold have any problem, then it can be directly reflected on plastic parts. Mold testing is important, as custom plastic mold company and client will have fully understand, then know how to fix the mold or next. So at first, all related auxiliary equipments should be well installed, like air blow system, water cooling system, etc. Check its reliability, then add plastic material to test the mold. At the same time, injection molding condition should be suitable.

Mold maintenance

Suitable maintenance of injection mold is important. This will prolong mold life time, also you may have the idea of this injection molds company, how their attitude of the mold manufacturing.

Plastic Injection Molding In China

Plastic Injection Molding In China

Plastic injection molding in China is at a high level of expertise in comparison with other Asian countries. Taiwan also has much better working conditions, environmental regulations and worker relations than most it’s neighbors.
Government policies that have enabled the plastics industry to develop in a free-market manner. This has enabled the plastic injection molding industry to develop to a high technical level. The open market nature has given fair competition the ability to bring in high end jobs and industries.

What are some advantages of China injection molding manufacturers?

  • Decades of industrial growth and stability without destroying the environment
  • Safe and healthy working conditions for the employees. Taiwan has a long history or good human rights relations which reflects in it’s labor laws.
  • For the environment. Industry has cooperated with the government to keep the island clean and relatively unpolluted
  • Costs are generally one-third less than those of the USA. This means you can receive high quality at reduced prices.
  • Thermoplastic injection molds, thermosetting molds, and custom molds of all types have developed to a high level of expertise.
  • No history of human rights abuse

What are some industries China specializes in?

China has an excellent relationship with the US, Europe and Japan because of it’s political and economic system. This has enabled the island country to attract leading aerospace, automotive, electronics, computer, and small appliance companies.
How can you find a reliable plastic injection molding company in China? A good place to begin your search is here One of the top companies in Taiwan for thermoset molding is Longzu Plastic Molding Company They have been in business for over 40 years, which is a lifetime in plastics.

Plastic Injection Mold Making And Laser Machining

Plastic Injection Mold Making And Laser Machining

The use of laser machining for making plastic injection mould has been available for years, but has only received limited acceptance. This is partly due to the uncertainty of the new technology and the cost of the machines.

However, for the right application, laser machining is a very viable option. With the latest generation of precision laser cutting machines, there are many improvements. Cutting speeds have increased, accuracy has improved, surface finishes are better, and the cost has come down.

How can laser machining help a plastic mold maker?

Precision laser cutting is an ideal operation for engraving and the machining of very intricate, small, shallow cavities. One of the benefits of laser machining is that it can engrave on complicated contours very consistently and with a high degree of accuracy. It is also possible to use laser machining services to engrave molds with changing vertical wall angles.

Laser micro machining can produce small, intricate and precise cores and cavities as well. Because the geometry is produced directly from the CAD file, the laser machining operation can faithfully reproduce the designed shape.

Are lasers accurate?

A precision laser cutting machine can cut within microns. The newer machines are also 5 axis and able to machine a wide range of angles and shapes. The XYZ positioning accuracy can easily rival that of a high quality CNC machining center.

Are laser engraving machines safe?

While it might sound dangerous, a precision laser cutting machine is actually quite safe. Of course, somebody might be tempted to ignore common sense and stare at the laser beam with their naked eye, but even this is not so easily done. Generally, however, the machine just hums away, doing its required task.

Are lasers fast enough to compete?

Depending on the application, a laser machining tool is financially justifiable. The applications are limited to shallow details, which eliminates many projects. However, if your need is for intricate, shallow details, precision laser machining could be the answer.

Because the entire process is computerized and automatic, it readily lends itself to small scale production. The engraving of logos is a great example. If your logo is to be cut into a contoured surface, it may not be possible to CNC machine it, or even EDM it. This is where laser machining can be a viable option.

Applications for laser machining

Small hole machining and shaped hole machining are good applications for laser machining. Turbine cooling holes are often laser machined. The helical shape of the blades are no problem for the laser because there is no tool holder to interfere. It is just a beam of light and the head is able to move about much easier than a milling machine, for example. go out other page to know more about plastic mold

Plastic Mold

Plastic Mold

Plastic has, quite literally, become the cornerstone of our society.  We make so many things from plastic that it is hard to imagine what our lives would be like if it was never invented.  With so many of our everyday products being made of plastic, it is easy to understand why plastic injection molding is such a huge industry.

Approximately 30% of all plastic products are produced using an injection molding process.  Of this 30%, a large amount of these products are produced by using custom Plastic Mold technology & injection molding technology.  Six steps are involved in the injection molding process, after the prototype has been made and approved.

Plastic Mold

The first step to the injection molding process is the clamping of the injection mould.  This clamping unit is one of three standard parts of the injection machine.  They are the mold, the clamping unit and the injection unit.  The clamp is what actually holds the mold while the melted plastic is being injected, the mold is held under pressure while the injected plastic is cooling.

Next is the actual injection of the melted plastic.  The plastic usually begins this process as pellets that are put into a large hopper.  The pellets are then fed to a cylinder; here they are heated until they become molten plastic that is easily forced into the mold.  The plastic stays in the plastic mold, where it is being clamped under pressure until it cools.

The next couple of steps consist of the dwelling phase, which is basically making sure that all of the cavities of the mold are filled with the melted plastic.  After the dwelling phase, the cooling process begins and continues until the plastic becomes solid inside the form.  Finally, the mold is opened and the newly formed plastic part is ejected from its mold.  The part is cleaned of any extra plastic from the mold.

As with any process, there are advantages and disadvantages associated with plastic injection molding.  The advantages outweigh the disadvantages for most companies; they include being able to keep up high levels of production, being able to replicate a high tolerance level in the products being produced, and lower costs for labor as the bulk of the work is done by machine.  Plastic injection molding also has the added benefit of lower scrap costs because the mold is so precisely made.Plastic Mould

However, the disadvantages can be a deal breaker for smaller companies that would like to utilize plastic injection molding as a way to produce parts.  These disadvantages are, that they equipment needed is expensive, therefore, increasing operating costs.

Thankfully, for these smaller companies, there are businesses that specialize in custom plastic injection molding.  They will make a mock up mold to the exact specifications, run it through the complete process and present the completed piece along with an estimate to complete the job to the customer.

Linda Moore writes on a variety of subjects including home ownership, travel, personal enrichment,

Injection Molding

Non stick coatings for injection molding Parts?

Yes! Just recognize the difference between ‘lubrication’ and ‘release’ and you need never fail again.

Today, there are a number of hard coatings for you, the mold maker, to choose. Many are conformal in nature and replicate surface geometry and finish. Many, too, resist thermal oxidation and can wear well. But what about release? You know, actual non-stick properties, like an egg cooked in a fry pan?

The answer for injection molding is not lubrication. And here is why.

Lubrication is defined as a means to reduce friction or wear. That is true. But it is meant to be a substance between two bodies in relative motion, a load bearing interface between two solid, cohesive surfaces. And that is not what you find when you heat the mold surface above your material glass transition temperature (Tg). Which is why hard coatings designed exclusively for lubrication fail.

Depending on the compounds you are molding, ‘sticking’ failures can manifest in a number of ways: skinning, loss of polymer mobility, lower gloss and surface roughness. Hard coatings ‘with lubrication’ can negatively affect heating and cooling which, alone, can alter depth and visibility of weld lines.

On the other hand, hard coatings for non stick can make significant improvements to finish. Surface flaws can be eliminated. And that means no more painting. Structural imperfections, too, like molded in stresses, which lead to warping or distortion, can be a thing of the past.

Unfortunately, Plastic mold makers who have had negative coating experiences are reluctant to re-consider. No different than those currently experiencing satisfactory but marginal performance. Why change, they say. Especially when you believe you have tried or know about all the coatings available, today, like plating, Teflon or PTFE, PVD or PACVD.

So, where is your answer? Just ask around. You will not have to look far. The answer, you will discover, is with those who understand surface forces, the characterization of adhesion, non stick coatings for injection molding parts.

Want more information? Need help with your surface engineering?

William Gunnar, a degreed scientist, researcher, engineer, and friend, has helped thousands of ‘best of class’ product designers and equipment manufacturers — for nearly 20 years now — surface engineer with coatings for success.

His publication, brings wisdom, honesty, leading edge information, and no nonsense advice to thousands weekly. Put together by some of the world’s leading experts in coatings and manufacturing, his FREE newsletters are truly must-reads for those who want to be ‘in-the-know’.

What Is Plastic Molding

What Is Plastic Molding

Plastics are synthetically produced non-metallic compounds. It can be molded into various forms and hardened for commercial use. Plastic molding products can be seen everywhere. Examples are jars, protective caps, plastic tubes, grips, toys, bottles, cases, accessories, kitchen utensils and a lot more.

Even the keyboard and the mouse that you use are made through plastic molding. Even the plastic parts of the chair that you are sitting on are created this way.

The basic idea in plastic molding is inserting molten liquid plastic into a ready shaped mold, for example the mold of a bottle. It will be then allowed to cool, then the mold will be removed to reveal the plastic bottle.

Plastic moulding can also custom-mold a wide variety of plastic products including: garden pots, cabinets, office trays and boxes, barriers, barricades and traffic signage and displays for product and marketing promotions.

If you are planning to go into plastic molding business, you should first know the different processes.  Choose from a plastic molding process that fits your budget, your expertise, and your resources. Here are basic definitions of various methods of plastic molding.

The Plastic Molding Processes:

1.      Injection Molding

In Injection Molding, melted plastic is forced into a mold cavity. Once cooled, the mold can be removed. This plastic molding process is commonly used in mass-production or prototyping of a product. Injection molding machines were made in the 1930’s. These can be used to mass produce toys, kitchen utensils, bottle caps, and cell phone stands to name a few.

2.      Blow Molding

Blow molding is like injection molding except that hot liquid plastic pours out of a barrel vertically in a molten tube. The mold closes on it and forces it outward to conform to the inside shape of the mold. When it is cooled, the hollow part is formed. Examples of blow molding products are bottles, tubes and containers.

Equipments needed in setting-up a blow molding business are relatively higher than injection molding.

3.      Compression Molding

In this type of plastic molds, a slug of hard plastic is pressed between two heated mold halves. Compression molding usually uses vertical presses instead of the horizontal presses used for injection and blow molding. The parts formed are then air-cooled. Prices of equipment used for compression molding are moderate.

4.      Film Insert Molding

This plastic molding technique imbeds an image beneath the surface of a molded part. A material like film or fabric is inserted into a mold. Plastic is then injected.

5.      Gas Assist Molding

Also called gas injection molding is used to create plastic parts with hollow interiors. Partial shot of plastic is then followed by high-pressure gas to fill the mold cavity with plastic.

6.      Rotational Molding

Hollow molds packed with powdered plastic are secured to pipe-like spokes that extend from a central hub. The molds rotate on separate axes at once. The hub swings the whole mold to a closed furnace room causing the powder to melt and stick to the insides of the tools. As the molds turn slowly, the tools move into a cooling room. Here, sprayed water causes the plastic to harden into a hollow part. In this type of plastic molds tooling costs are low and piece prices are high. Cycle time takes about 40-45 minutes.

7.      Structural Foam Molding

Structural foam molding is a process of plastic molding usually used for parts that require thicker walls than standard injection molding. Inserting a small amount of nitrogen or chemical blow agent into the plastic material makes the walls thicker. Foaming happens as the melted plastic material enters the mold cavity. A thin plastic skin forms and solidifies in the mold wall. This type of plastic molding can be used with any thermoplastic that can be injection molded.

8.      Thermoforming

In this plastic molding process, sheets of pre-extruded rigid plastics are horizontally heated and sucked down into hollow one-piece tools. When the hot plastic solidifies, its shape conforms to that of the mold.

Tooling costs are usually low and piece prices vary on the machinery.

Plastic molding is a very technical process. It needs experts in this type of manufacturing business for it to be competitive in the market. Therefore, a very scientific and systematic study should be first made before going into this endeavor, if you want to know more about us, please go to our mean website to know more.