Aluminum Die Castng
(1) malleable cast iron is a certain range of chemical composition of white cast iron by annealing the resulting solid graphite graphite cast iron floc group. It has a very high plasticity, it is “malleable” Aluminium Die Casting name, in fact, is not forged, but it can be a good bend, elongation up to 15% strength is also high.
(2) Pressure casting is liquid or semi-liquid metal, filled with high-speed die casting mold cavity, and rapid solidification under pressure molding, casting and get a special casting method is generally applicable to non-ferrous metals. These two processes die casting from the use of the material, size and shape of the product, process methods, products, applications are different
Die casting technology and production
The book was discussed in detail the basic knowledge and production of the die casting technology. The main contents include casting, die casting machine principle, parameters of die casting process and its determining method, die casting pouring system and die casting die structure design, quality control, production of the die casting Aluminum Die Casting and die casting workshop operation management. Also introduced CAD for die casting die and die casting filling process simulation technology and application etc.. This book both basic theory and practical technology of die casting die for die casting industry, the technical staff, production staff and management personnel to read or as training materials, but also can be used as the relevant professional colleges teaching reference books.
Book order
Preface
Introduction
The first chapter of die casting process and die casting overview
1.1 die casting process overview
1.1.1 die-casting process principle
1.1.2 die-casting production department and production process
1.1.3 die-casting process characteristics
1.2 die casting overview
1.2.1 die casting of the classification and technical requirements
1.2.2 die casting process
1.3 die casting technology development
The second chapter die casting machine and its properties and selection
2.1 classification of die casting machines
2.2 die-casting machine ‘s basic mechanism and function
2.3 cold chamber die casting machine and hot chamber die casting machine process characteristics
2.3.1 cold chamber die casting machine process characteristics
2.3.2 hot chamber die casting machine process characteristics
2.4 die casting machine main technical parameters and significance
2.5 the choice of die-casting machine
The 2.5.1 die casting machine type selection
The 2.5.2 die casting machine class selection
2.5.3 die casting machine tonnage determine
2.5.4 die casting machine technical parameter calculation
The 2.5.5 die casting machine energy calculation
2.6 modern advanced function of die casting machine
2.6.1 high speed, efficient and flexible injection system
2.6.2 advanced real-time control system
2.6.3 fault monitoring, remote diagnosis and alarm function
2.6.4 data collection, analysis and processing, production management and statistical analysis
2.6.5 die-casting workshop for network monitoring, communication management and production of automatic scheduling
2.6.6 partial pressure
The 2.6.7 hydraulic system
2.6.8 automatic die casting machine
The third chapter the injection process and die casting process parameters
A 3.1 injection process and injection process curve
3.1.1 injection process
3.1.2 injection process curve
3.1.3 injection process settings
3.2 parameters of die casting process and its determining method
3.2.1 pressure
3.2.2 speed
3.2.3 time
3.2.4 temperature
Chapter fourth design of gating system
4.1 gating system composition, types and design key points
4.1.1 gating system.
4.1.2 gating systems
4.1.3 gating system design content and knowledge requirements
4.1.4 gating system design
The 4.2 gate design
4.2.1 ingate position determination
4.2.2 ingate area calculation
4.2.3 gate thickness, width and length determination
4.2.4 gate and cavity is connected by way of
4.2.5 gate design data
4.2.6 different gating system filling simulation example
4.3 runner design
The basic form of 4.3.1 runner
4.3.2 runner structure
4.3.3 sprue design
4.3.4 fan sprue design
4.3.5 taper runner design
The 4.4 exhaust system
The role of 4.4.1 exhaust system
4.4.2 exhaust system for determining the position of and the main points of the design
4.4.3 exhaust system structure and size
4.5 P-Q2 principle and its application
4.5.1 technology thought and purpose
Based on 4.5.2 theory
4.5.3 die-casting mold flow pressure curve (die casting pressure demand curve)
4.5.4 machine effective pressure line
4.5.5 P-Q2 diagram
Chapter fifth design of die casting die
5.1 die casting mold basic structure and function
5.2 die casting mold design
5.2.1 design basis and steps
5.2.2 design points
5.2.3 design steps and contents
The 5.3 type of identification
5.3.1 parting surface form
5.3.2 choice of parting surface
5.3.3 typing scheme example
5.4 cavity arrangement
The 5.5 mold body structure and parts design
Basic structure of the 5.5.1
5.5.2 insert fixed forms and sizes
The 5.5.3 template size determination
5.5.4 die casting and pressure chamber and plunger and template matching size
5.5.5 guide pillar and the guide sleeve design
5.5.6 molding size determination
5.6 the design of the core-pulling mechanism
5.6.1 core-pulling mechanism classification and composition
5.6.2 core-pulling mechanism working principle and main parameters
The 5.7 push-out mechanism design
5.7.1 ejecting mechanism and drive means.
5.7.2 ejecting mechanism design
Commonly used 5.7.3 top rod form
5.7.4 commonly used by pushing the tube and the push plate form
5.8 die casting technical requirements
5.8.1 die match between the parts fit tolerance
5.8.2 die casting different parts work surface roughness
5.8.3 die-casting mold assembly diagram should be marked on the technical information
5.8.4 die-casting mold shape and installation size
5.8.5 die-casting mold assembly technical requirements
5.9 die materials and heat treatment
5.9.1 die-casting mould forming parts material requirements
5.9.2 die-casting mold material of main parts and heat treatment
5.9.3 abroad and home, die-casting die used steel table
The sixth chapter die-casting mold computer aided design and die casting process simulation
6.1 CAD for die casting die
6.1.1 general CAD software
6.1.2 die-casting die for CAD software
6.1.3 die and process content and application of CAD software
6.2 die casting process simulation
Basic knowledge of 6.2.1 simulation technology
The basic structure and function of the 6.2.2 simulation software
6.2.3 simulation software
6.2.4 simulation software selection
6.2.5 on the simulation software of user requirements
6.3 die casting process simulation example
6.3.1 plunger variable motion simulation
6.3.2 filling mode and oxidation and air entrainment defect
6.3.3 cold septal defect formation
6.3.4 filling speed and the filling state
6.3.5 gating system of flow simulation
6.3.6 gating system design scheme optimization
Other 6.3.7 simulation
6.4 die casting technology on the simulation software requirements
The seventh chapter of die casting alloy and its smelting technology
Composition and characteristics of 7.1 aluminum alloy
7.1.1 casting aluminum alloy
7.1.2 die casting zinc alloy
7.1.3 die casting magnesium alloy
7.1.4 die casting alloy casting process performance comparison
7.2 alloy smelting and melting equipment
7.2.1 alloy melting
7.2.2 aluminum and zinc alloy smelting furnace
7.2.3 magnesium alloy smelting equipment
7.3 aluminum alloy melting point
7.3.1 smelting equipment and tools ready
7.3.2 charge
7.3.3 charging
7.3.4 smelting
7.3.5 degassing and slag removal
7.3.6 melt conveying
7.4 zinc alloy melting point
7.4.1 smelting equipment and tool protection
7.4.2 charge
7.4.3 charging
7.4.4 alloy smelting
7.4.5 waste disposal
7.5 mg alloy melting point
7.5.1 crucible and melting instrument
7.5.2 charge
7.5.3 charging
7.5.4 magnesium alloy ingot preheating
7.5.5 protection gas using
7.5.6 smelting operation
7.5.7 waste material recycling and refining
7.5.8 magnesium alloy smelting operation safety
The eighth chapter die-casting workshop and die casting operation
8.1 die casting workshop
8.1.1 die-casting workshop planning and layout
8.1.2 die-casting workshop organization and management
8.1.3 die-casting workshop environment
8.2 die casting operation
8.2.1 casting operations personnel arrangement
8.2.2 site and equipment ready
8.3 die casting operation
8.3.1 die-casting mold check
8.3.2 die casting installation
8.3.3 cooling water connection
8.3.4 die-casting mold temperature control
8.4 die casting production
8.4.1 die and mold repair
8.4.2 plunger and the pressure chamber installation and maintenance
8.4.3 pressure chamber filled with a degree and thickness of residual material control
8.4.4 die releasing agent and lubricant selection
8.4.5 die casting mold cleaning
8.4.6 casting and injection
8.4.7 die out
8.4.8 die casting mold maintenance and custody
8.4.9 casting work instruction documents
8.4.10 casting operation matters needing attention
8.5 die casting cleaning
8.6 die casting processing
8.6.1 die casting of orthopaedic
8.6.2 die casting aging treatment
8.6.3 die casting mechanical processing
8.6.4 die casting infiltration process
8.6.5 die casting surface treatment
The ninth chapter die casting defects and quality control
9.1 die casting defects and elimination measures
9.1.1 surface defects and eliminating measures
9.1.2 internal defects and elimination measures
9.1.3 shape and size of defects and elimination measures
The 9.1.4 matrix incoherent defects and elimination measures
9.1.5 other defects and elimination measures
9.2 die casting defects elimination strategy
9.3 die casting quality detection method
9.3.1 visual inspection method
9.3.2 metallographic examination
9.3.3 mechanics performance test
9.3.4 chemical composition test
9.3.5 nondestructive inspection
9.3.6 withstand voltage test
9.3.7 corrosion test
9.3.8 dimension inspection method
9.4 die casting acceptance
9.5 die casting quality control
Influence of casting quality factor 9.5.1
9.5.2 quality control work
The 9.5.3 inspection system
9.5.4 quality control point die casting setting and testing factors
9.5.5 quality control procedures
The 9.5.6 quality management system
Go to our official website to know more